Parts & Accessories

The Wahoo RPM speed sensor is the sleek, magnet-less solution for capturing cycling speed data. It easily mounts to your bike's front wheel hub, and the Bluetooth Smart and ANT+ dual band technology allow you to connect to and display data on both smartphones and bike computers. Tracking speed data has never been this easy. - Both ANT+ and Bluetooth Smart capabilities allow for a wireless connection to both smartphones and bike computers. - No tangled wires on your bike to connect the sensor to your device. - The RPM speed installs easily with no magnets required - It only weighs 16.5 grams with the mount included - Provides accurate speed data during your ride - Mounts on most front wheel hub with a secure silicone casing - Two LED lights show the sensor's device connection (blue) and speed detection (red) - No charging required! Operates on a coin cell battery for up to 1 years. - RPM Speed will fit with most bikes and frame sizes

All you need for cycling data, all together at once! The Wahoo RPM Speed and Cadence sensors are both a sleek, wireless, and magnet-less solution. Each mounts easily to your bike and the Bluetooth Smart and ANT+ duel band technology allows you to connect and display data on both smartphone and bike computers. - Dimensions (LxWxH): 1.25" x.75" x 1" - Weight: 7 grams (without mount) - Battery: CR2032 - Battery Life: Up to 12 months - Water Rating: IPX7 (waterproof up to 5 ft) - Wireless Signal Strength: Up to 10 feet - Note: Speed Sensor is NOT compatible with spin bikes

A lightweight and highly adjustable mount for positioning any Garmin computer on aero bars. The pivoting two piece design offers multiple mounting positions based on aero bars, hydration systems and rider preference. - For 22.2mm diameter aero bar extensions - Compatible with all Garmin EDGE computers - Highly adjustable for multitude of mounting positions - Replaceable Garmin Insert with K-EDGE “Definitive Click” locking system - GoPro Interface Compatible - Weight: 29g - Anodized Colors: Black, Red, Blue - Made in Boise, Idaho, USA - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded

The BlueGiga dongle gives Rouvy, CycleOps' virtual training software, the ability to seamlessly connect to Bluetooth devices and sensors. The BlueGiga dongle contains a Bluetooth (BLE) radio that allows PCs to communicate with BLE devices, including CycleOps smart indoor bicycle trainers and power meters made by the folks at PowerTap. Most importantly, the BlueGiga dongle is necessary to update the firmware Over the Air (OTA) via VirtualTraining for the Hammer and Magnus bike trainers. - Bluetooth dongle for PCs to work with Rouvy - Needed for Over the Air Firmware Updates to Smart Indoor Bike Trainers. - Works with PC desktops and laptops.

The Bosch Purion is a minimalist on-board computer designed for anyone who wishes to focus on the most important information and prefers an uncluttered handlebar. The Purion displays the essentials and lets riders get all important information with a click of the thumb, while keeping hands on the handlebars. Five different riding modes provide just the right amount of assistance in every situation. - Manages four levels of assist from Eco to Turbo, with an eMTB mode specially designed for the Performance Line CX Drive system - Features include charging status, speed, riding mode, range, trip distance and total distance

Get your computer dialed with the perfect magnet Getting the correctly sized magnets means you're worrying about where the next coffee stop is, not if your computer is recording the ride. - Universal crank magnets sized for your bike and sensor - Compatible with all cadence sensors

Easily integrated Designed specifically for specific Bontrager Circuit MIPS road bike helmets, the Blendr mount easily integrates Bontrager Ion lights and GoPro cameras. - Quickly mount rear light to the back of your Bontrager Circuit MIPS road bike helmet - Tested with an accelerometer for intended breakaway point if involved in a crash

Light up the road Blendr is the ultimate integration system for clean and easy installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr Universal Ion Mount for a clean, flush look that securely holds your Bontrager Ion light in a perfect position to see and be seen. - Blendr is an elegant, integrated accessory mounting solution - Clip can be rotated for compatibility with many Bontrager accessories - Works with any Blendr-compatible stem and the accompanying base

Keep your computer and sensors ready for every ride with replacement batteries Key features: - CR2032 battery is used for most Trek and Bontrager computers - 23AE battery is used for the Bontrager Interchange Analog Wireless Sensor - LR44 and L1154 batteries are identical and used in Bontrager SpeedTrap Sensor

Bontrager's DuoTrap Digital Speed/Cadence Sensor pulls double duty for your ANT+ cycling computer. It wirelessly transmits speed and cadence data and fits directly into the chainstay of certain Trek bicycles for a clean look that installs in seconds.

Connect ANT+ and Bluetooth Smart devices to all of the data available from the DuoTrap S sensor for your on-the-bike wireless needs. • ANT+ 2.4 GHz and Bluetooth Smart wireless digital speed and cadence sensor • ANT+ and Bluetooth Smart allow simultaneous use of Trip 300 and smartphone • For use with many ANT+ and Bluetooth Smart wireless technology enabled devices • Includes Bontrager wheel magnet, crank cadence band, and CR2032 battery • Works with Trek DuoTrap compatible bikes

Get more data from your rides with the Bontrager Interchange digital combo speed and cadence sensor. This ANT+ 2.4 Ghz is designed to work with Bontrager Node wireless computers. It also works with many other ANT+ enabled devices. Sensor adjustment is easy with the adjustable arm. • ANT+ 2.4 Ghz and Bluetooth Smart wireless digital speed and cadence sensor • ANT+ and Bluetooth Smart allow simultaneous use of Trip 300 and smartphone • For use with many ANT+ and Bluetooth Smart wireless technology enabled devices • Independently adjustable arm for precise alignment of speed and cadence sensors • Includes Bontrager wheel magnet and crank cadence band • Includes silicone mounting strap to fit most chainstays and CR2032 battery • Visit www.thisisant.com/directory/ for compatible ANT+ devices • Visit www.bluetooth.com/pages/bluetooth-smart-devices.aspx for compatible Bluetooth devices

- Replacement parts and accessories for SpeedTrap Digital Speed Sensor - Fork Cap covers SpeedTrap pocket when sensor is removed - Spacer is required on some forks to position sensor closer to wheel magnet

Bontrager's SpeedTrap Digital Speed Sensor conveniently plugs into any Bontrager fork with SpeedTrap technology for the ultimate in convenience. And, it wirelessly transmits speed data to your ANT+ cycling computer.

Zipp delivers an uncomplicated computer mount for aerobar extensions that’s easy to install, lightweight, and vibration and slip free. The 22.3mm industry standard mount installs simply and securely on aero extensions. The Zipp QuickView TT Computer Mount is aerodynamically shaped for left-side installation, but also can be installed on the right bar extension. It comes with a single Torx T25 bolt, flexible mounting clamp, and a quarter-twist mount.

Handlebar computer mount for Garmin/Wahoo for Vuka Shift AXS

Wahoo USB ANT+ dongle Kit connects KICKR, KICKR SNAP and other ANT+ enabled devices to a Mac or PC. The 3-foot extension cord extends the USB ANT+ transmitter away from the computer and towards the connected device to avoid signal interference.

The Action Camera Harness / NDM 1 can be used on our backpacks equipped with the No Dancing Monkey 1.0 and No Dancing Monkey 1.2 harnesses. This attachment is only available in one size and is compatible with the following products: - Raw - MTB Hydro - Airborne - Ranger - Patriot - Vertical - Outlander (NOT Compatible with Outlander PRO) The Action Camera Harness / NDM 1 is not just a normal camera harness. Unlike other harnesses available to date, our backpacks offer a bounce-free solution. This harness is very easy to use. You simply take off the current chest strap that your pack is equipped with and replace it with the Action Camera Harness. Once exchanged you just need to use the velcro strap to keep the attachment stable while going into action. The harness is not compatible with neck brace. Adaptors for cameras are not included. We recommend using the included standard attachment for GoPro cameras.

Up-To-Front Multi-Mount aligns everything to be mounted front and center for viewing convenience and to easily capture those precious ride moments, track your ride, and illuminate your way home from your adventure. Includes adapters for mounting GoPro/Shimano Sport Cameras, Garmin Edge/Wahoo/Sigma GPS cycle computers, Topeak CubiCubi front lights, WhiteLite HP 500, WhiteLite 800BT, and other GoPro-mount-compatible devices. Flipflop mounts can be positioned to customize device viewing height so you can be focused and enjoy your ride! - Material: Forged aluminum / Engineering grade polymer - Modular Multi-Mount: Adapters included for GoPro / Shimano Sport Cameras, Garmin Edge / Wahoo / Sigma - Device: GPS cycle computers, Topeak CubiCubi front lights, WhiteLite 800 BT, and WhiteLite HP 500 - Bracket: Fits 25.4 – 31.8mm handlebars (shims included) - Max Load: 480g / 16.93oz - Added Features: Angle adjustment (Sport Camera), Rotates for landscape or portrait viewing (RideCase) - Weight: 52g / 1.83oz - Size: 12.5 x 6.6 x 4.3cm / 4.9" x 2.6" x 1.7"

An innovative cycle computer/action camera center mount, specifically designed for integrated stem/handlebar systems. Various mounting positions for Garmin Edge/Wahoo/Sigma GPS cycle computers and GoPro/Shimano sport cameras, Topeak CubiCubi front lights, WhiteLite HP 500, WhiteLite 800 BT, and other GoPro-mount-compatible devices. - Compatible Devices: Garmin Edge / Wahoo / Sigma GPS bike computer / GoPro action cams and other devices with GoPro mount - Handlebar Compatibility: Shimano Pro Stealth, FSA Plasma, Ritchey WCS Solostream, SCOTT SYNCROS RR1.0 Carbon Aero 420, Most Talon, Canyon H31 & CP series - Material: aluminum / fiberglass composite - Max load: 220g - Weight: 40g (120mm) / 45g (150mm) - Dimensions: 12 x 3.5 x 3cm (120mm) / 15 x 3.5 x 3cm (150mm)

Enjoy easy viewing with the Butler Out Front handlebar mount! Out Front Mount for following models: BC 1909 STS BC 2209 STS ROX 5.0 ROX 6.0 ROX 8 ROX 8.1 ROX 9 ROX 9.1 *Note: not for use with ROX 10.0

Shimano Di2 External Battery Mounts - All Di2 components on the bicycle require the same firmware version. Using Di2 components with different firmware versions may cause malfunctions - Use Di2 system checker to update component firmware

- Di2 internal battery, fits all e-Tube Di2 groups - Capacity: 500 mAH (± 2000km) - Use with EW-WU101 or SC-MT800 interfaces/junction to gain BlueTooth Smart wireless connectivity for on-the-fly adjustments with smartphones and tablets - Requires SM-BCR2 charger

The new DN300 Built-In type battery features the same waterproof design that Di2 users have loved for generations. Now with 3 ports, it delivers stable power to Shimano's 12-speed road derailleurs (and shifters if a fully wired option is selected). - Compatible with thinner next-generation electric wire SD300 and systems after R9250/R8150 series - Li-Ion type - Capacity: 500 mAH |3.7Wh (± 2000km autonomy) - Rated voltage: 7.4V - Charges through RD-R9250 |RD-R8150 rear derailleur using EW-EC300 Di2 Charging Cable (sold separately) - Fixing small parts included - Weight: 52g

Shimano BT-R1A External Di2 Battery - All Di2 components on the bicycle require the same firmware version. Using Di2 components with different firmware versions may cause malfunctions - Use Di2 system checker to update component firmware - Di2 External Battery, battery charger, and power cable are universal between Dura-Ace 9070, 7970, Ultegra 6870, 6770 and Alfine Di2 systems - Battery weight: 71 grams

Shimano Di2 External Battery Mount - All Di2 components on the bicycle require the same firmware version. Using Di2 components with different firmware versions may cause malfunctions - Use Di2 system checker to update component firmware

Connect your PC to CycleOps VirtualTraining.

BLE USB Adapter gives Rouvy virtual training software the ability to seamlessly connect to Bluetooth devices and sensors. The adapter contains a Bluetooth (BLE) radio that allows PCs to communicate with BLE devices, including Saris smart indoor bicycle trainers and power meters. Most importantly, the BLE USB Adapter is necessary to update the firmware Over the Air (OTA) via VirtualTraining for the Hammer and Magnus bike trainers. - Bluetooth adapter for PCs to work with Rouvy - Needed for Over the Air Firmware Updates to Smart Indoor Bike Trainers. - Works with PC desktops and laptops.

Be it the fireworks of a finale, an ideal rhythm, climbing on the top, or a deep, dark place extracting the last kilojoule of effort on your bike split, you want to adjust your gear with the twitch of a finger. eTap Blip satellite shifters allow you to shift when you want, where you want. - Limitless remote shifting positions for drop and aero bars - Wired shift buttons can be positioned however the rider prefers - Connect to Blip Box or drop bar eTap levers - Compatible with SRAM RED eTap shift/brake controls

Free up bar space and secure your GoPro and many other stem-mounted accessories with our Ritchey Universal Stem Mount. Our unique mount means clutter- and hassle-free mounting of your favorite devices where they're easily viewed and operated. - Compatible with Ritchey C220 and 4-Axis 44 stem faceplates - Forged and machined alloy - Includes extended-length hardware